Precautions and safety instructions for heat shrinkable tube cutting machine

In the daily use of the cutting machine , the use of automated machinery is essential. The irregular use of some machines may cause some problems, so this time we will introduce the safety issues of the use and operation of the cutting machine

1. Same as other machines, before starting the price difference cutting machine, the gas, electricity, machinery, and control devices are normal. The fixing screws of the parts everywhere are not out of position, and the various control devices are loose. Barriers to use

In the surrounding area, list sundries such as scattered parts, clothing, books, tapes, etc.

2. Check that the lubricating oil points at each point of the cutting machine should be well lubricated, and carry out a regular oil brushing maintenance

3. Concentrate on installing the blade to prevent accidentally scratching your hands. The power should be turned off when installing the blade, and the nut of the cutter shaft should be

Locknut guard must be locked tightly to avoid collapse

4. Detect whether the automatic control display is valid

5. Check that the equipment is in normal operation before it can work

6. When disassembling the blade, it is necessary to lock the bearing positioning screw in the blade screw and the cutter shaft guard to prevent the cutter shaft from falling off during operation.

7. When adjusting the depth of the knife, you should pay attention to proper adjustment to prevent the knife from collapsing due to excessive contact pressure between the blade and the reel, the broken blade flying out and hurting people, and the broken blade hurting people.

8. Before starting the equipment, reconfirm that all the work is correct, and you can start and click to cut. When the equipment is running, the operator is not allowed to touch the rotating part with any part, and it is forbidden to beat the machine with hands, and it is forbidden to grab the running materials by hand. And waste, it is forbidden to handle the waste in the rotating part by hand, so as to prevent it from being brought into the equipment and causing accidents.

9. Someone must monitor the operation of the equipment during production, and it is forbidden to run the equipment without anyone.

10. When loading and unloading materials, you must confirm that the power is off before you can work.

11. If abnormal conditions are found during operation, the machine should be stopped immediately, and it is forbidden to run the machine without supervision.

After the exception is handled by the electricity, run again

12. After the slitting work is completed, the main power supply must be cut off, the equipment and the surrounding area of the equipment must be thoroughly cleaned, and random placement is strictly prohibited. The machine tools should be returned to the specified position after the operation is completed.