Safety operating procedures for cutting machines

The cutting machine is a device used for the division and cutting of sheets in various industries, and is widely used in many industries. Let me talk about the safe operation procedures of the cutting machine.

Safety operating procedures for cutting machines

1. Before starting the machine, it is necessary to check that the electrical, mechanical, and control devices of the cutting machine are normal, that the fasteners are not loose, that the control devices and safety protection devices are in good condition, and that there are no obstacles around the equipment that affect the operation.

2. Check that the lubrication points of the cutting machine should be well lubricated.

3. Check that each rotating part should be flexible.

4. Concentrate on installing the saw blade to prevent accidentally scratching your hands. The lock nut guard of the cutter shaft must be locked tightly.

5. Detection automatic control should be sensitive and effective.

6. Check that there is no abnormality in the empty operation of the equipment before operation.

7. When loading and unloading the knife, the positioning screw of the knife shaft bearing, the knife shaft protective cover, and the lock must be locked.

8. When adjusting the depth of the knife, you should pay attention to the moderation, so as to prevent the contact pressure between the blade and the product reel from being too large, causing the knife to collapse, and the broken blade to fly out and hurt people.

9. Before starting the equipment, it is necessary to reconfirm that all preparations are correct before starting the motor for cutting.

10. When the equipment is running, any part of the operator's body must not touch the rotating part. It is forbidden to slap the product with your hands; it is forbidden to grab the running materials and waste edges with your hands; it is forbidden to take the waste from the rotating parts of the equipment with your hands. Avoid being brought into the equipment and causing injury accidents.

11. When working on the rotating parts of the equipment, it is strictly forbidden to wear gloves.

12. Someone must monitor the operation of the equipment during production, and it is forbidden to operate the equipment without people.

13. When loading and unloading materials, you must confirm that the power is off before you can work.

14. If an abnormal situation is found during operation, it should be stopped urgently. When the abnormality is eliminated in the rotating part, the power supply of the equipment must be cut off before operation.

15. After the slitting operation is completed, the main power supply must be cut off. Thorough cleaning of equipment and site sanitation.

16. Cleaning tools and utensils are placed in the specified position, and littering is prohibited.