1. Before using the cutting machine, add lubricating oil to the spring grooves at the left and right ends of the cutting knife, and lift the cutting knife up and down several times by hand. The purpose is to make the cutting knife smooth. Secondly, the active parts and connecting rods need to be lubricated.

2. Check the looseness of the blade and each fastening screw every 2 hours to ensure the stable quality of punching products.

3. Always pay attention to when cutting stickers and tapes, some glue is stuck on the edge of the knife. These glues sometimes lift up the paper and affect the smoothness of paper output. Pay attention to cleaning these glues with kerosene frequently.

4. When the cutting machine is installed, the closer it is to the paper output position of the printing machine, the better. For example, the cutting tape can be removed and installed on the iron block attached to the machine for lengthening. Use cardboard to press the tape, in a word: Try to cover the tape as much as possible so that it can be cut smoothly.

5. If the cutting knife is blunt, you must take it back to the equipment factory to sharpen the knife, otherwise the cutting will continue, and the cutting machine can be used well only if you master it skillfully.

Features

1. Multi-stage jump cutting can be set to meet different process requirements.

2. The minimum jump cutting width is 0.5mm.

3. The pressure is stable and adjustable, and the stability is displayed on the dial indicator.

4. Multi-functional use, it can be loaded with simple knives.

Features

1. The whole machine adopts casting structure, and the imported cutter is durable.

2. Servo system control is adopted, with high precision of material pulling, precise cutting and high jump cutting precision.

3. The air-expanding shaft takes in and out materials, which can cope with large roll diameters and heavy materials in a stable way.

4. The safety grating of the whole machine and the air suction configuration are stable, safe and reliable.